Timothy Nicholson (M Eng, 2001), “McAlister Building Steel Coupon Testing.”
Hathairat Maneetes (MS, 2002), “The Effects of Cross Frames and Lateral Bracing on the Dynamic Response of Curved Steel I-Girder Bridges During Construction.”
Tapan Sabuwala (MS, 2002), “Finite Element Analysis of Steel Beam-to-Column Connections Subjected to Blast Loads.”
Tze-Wei Choo (M Eng, 2003), “The Response of a Continuous Skewed Steel Bridge Superstructure under Various Deck Placement Methods during Construction.”
Jose Colon (M Eng, 2003), “Finite Element Analysis of Lenticular Truss Bridges.”
John Lobo (MS, 2003), “Effects of Geometric Imperfections on Horizontally Curved Steel Girder Bridges.”
Panit Vanachayangkul (M Eng, 2003), “Effective Methods for Replication of Crossframe Stiffness in Bridge Grillage Models.”
Deanna Nevling (MS, 2003), “Evaluation of Level of Analysis Methodologies for Horizontally Curved I-Bridge through Comparisons with Measured Response of an In-Service Structure.”
Bradley Bell (MS, 2004), “Effects of Erection Procedures on the Response of Horizontally Curved I-Girder Bridges.”
Aaron Bennett (MS, 2004), “Analysis of Lateral Bending and Torsional Stresses in a Skewed Composite Prestressed Bridge during Construction.”
David DePolo (MS 2004), “Evaluation of Lateral Flange Bending for a Horizontally Curved I-Girder Bridge.”
Amir Ahmad Hedayati (M Eng, 2004), “Comparison of Finite Element Modeling and Grillage Modeling of a Bridge Deck with Cross Bracings.”
Matthew Kostick (MS, Fall 2004), “Evaluation Of Design Code Prestress Loss Prediction Methods For Use With Pennsylvania High Strength Concrete.”
Joseph Fleishmann (M Eng, Spring 2005), “A Study of the Effects of Changes in Unbraced Length on Bending and Warping Stress Distribution in a Horizontally Curved, Steel, I-Girder Bridge.”
Jason Shura (MS, Spring 2005), “The Effects of Horizontal Curvature on Warping during Construction of a Plate Girder Bridge with Large Radii.”
Richard Myers, (M Eng, Fall 2007), “Kontek Barrier Evaluation”. (Co-supervised w/ A. Schokker)
Andrew Kubic, (M Eng, Fall 2007), “Simple Span Made Continuous Bridge Performance Evaluation”.
Andrew Coughlin, (MS, Summer 2008), “Contact Charge Blast Performance of Fiber Reinforced and Polyurea Coated Concrete Vehicle Barriers.” (Co- supervised w/ A. Schokker)
Venkata Nadakuditi, (MS, Summer 2008), “Effects of Cross Frames and Diaphragms on Forced Excitation of a Horizontally Curved Steel I-Girder Bridge.”
Deanna Nevling, (PhD, Fall 2008), “Development of Guidelines for Erection Procedures for Horizontally Curved Steel I-Girder Bridges through Analysis of a Parametric Group of Bridges.”
Chien-Chung Chen, (PhD, Summer 2009), “A Study of Blast Effects on Elastomer Coated Steel Components.”
Junwon, (PhD, Summer 2009), “Seismic Fragility Curves of a Family of Curved Steel Bridges.”
Lynsey Reese (MS, Summer 2009), “Critical Member Removal and Load Redistribution of Deteriorated Truss Bridges.”
Gaby Issa-El-Khoury (PhD, Architectural Engineering, Summer 2010), “Optimization of Longitudinal Web Stiffener Location in Horizontally Curved Plate Girders.” (Co-supervised w/ L. Geschwindner)
Omar Ashour (Integrated BS/MS, Fall 2010), “Effects of Replacing Cross Frames with Diaphragms on Curved Bridge Construction Response.”
Edward O’Hare (MS, Summer 2011), “Computational Assessment of Steel-Jacketed Bridge Pier Column Performance under Blast Loads.”
Mohammad Sharafbayani, (PhD, Fall 2012), “Evaluation Of Bracing Systems In Horizontally Curved Steel I-Girder Bridges”
Chris Noveral (Integrated BS/MS, Summer 2013), “Investigation of a Basic HSS Connection for Load Sharing in Anti-Ram Vehicle Barriers.”
Scott Kinney (MS, Summer 2013), “Assessment of Load Sharing Members in an Anti-Ram Bollard System Subjected to Vehicle Impacts.”
Kendra Jones (MS, Summer 2013), “Blast Response of Polyurea Coated Stone Cladding.”
Edward O’Hare (PhD Summer 2015 - Co- Advisor Doctoral Committee Special Member) “Behavior of Concrete-Filled Tube Through-Beam Connections Subjected to Varying Load Rates.”
Tanit Jaissa-Ard (PhD Summer 2015 - Co- Advisor Doctoral Committee Special Member) “Statistically-Based Air Blast Load Factors Based on Imprecise Parameter Statistics for Reinforced Concrete Wall.”
Lynsey Reese (PhD Fall 2015 - Co- Advisor Doctoral Committee Special Member) “Experimental Testing and Numerical Modeling of Geomaterials Interacting with Rigid Bodies Under Impact Loading.”
University of Nebraska:
Bernard Frankl (Ph.D., Summer 2017), “Buckling and Shear Capacity of Horizontally Curved Steel Plate Girders.”
Nicole Jaber (Non-Thesis MS, Summer 2014).
Kevin Williams (Non-Thesis MS, Summer 2014).
Corbin Mundt (Non-Thesis MS, Fall 2014).
Chandana Balakrishna (MS, Summer 2018), “Examination of Steel Pin and Hanger Options - Retrofit to Replacement.”
Ahmed Rageh (Ph.D., Spring 2018), “Cost-Effective Structural Health Monitoring Instrumentation
Plans for Steel Railway Bridge.”
Chen Fang (Ph.D., Spring 2019), “Structural Hardening/Resilience of Bridge Pier against Vehicle Impact and Explosion Loads.”
