
The LUMEX Avance-25 significantly reduces the required designing and production time of mold dies. Manufacturers can expect a reduction in molding time but also quality improvements in their molds from the 3D placement of water pipes in the mold dies and porous sintering.

Laser Specs
- 40-400 W Yb fiber Laser
- Beam mode quality (M2): < 1.1
- Wavelength: 1070 nm
- Galvano scanner system

Machine Specs
- Spindle speed range: 450 to 45,000 RPM
- Spindle bearing inner diameter: 25 mm
- 1/10 taper special BT20 tool shank
- Max spindle torque: 0.7 N-m
- Linear feed rate: 1- 30,000 mm/min
Capabilities
- Hybrid additive manufacturing system
- Hybrid implies additive and subtractive capabilities
- Print metals and subsequently machines to smooth surface finishes
- Metal laser sintering and milling
- Print 3D metal objects
- Maraging steel, stainless steel 630, & stainless steel 316L
- Ti-6Al-4V & pure titanium
- Cobalt chrome superalloy
- Nickel alloy 718
- Layer thickness 50 μm (2 mils)
- Build size: 250 mm x 250 mm x 100 mm
- Nitrogen or argon enriched atmosphere
- Position accuracy: +/- 2.5 μm

Peripheral devices
- Fume collector:
The fume collector eliminates fume (metal vapor agglomerate) and odor generated at the time of laser processing. The fume collector eliminates flux, oil, and adhesive ingredients, thus preventing clogging.
- Nitrogen gas generator:
The nitrogen gas generator is used to generate nitrogen to be filled into the chamber in laser sintering process. The nitrogen gas generator can provide nitrogen from the atmosphere within a short time whenever required.
- Chiller:
The chiller is used to cool the laser oscillator and prevent equipment damage resulting from heat radiation.